GX process library

See the workpiece. Watch the process.

Real process footage from the GX company knowledge base, organised by the application shown on camera.

These are process demonstrations, not measured customer case studies. No cycle-time, yield or quality result is claimed from video alone.

GX process footage

01 / Fluid dispensing

Silicone dispensing on a metal housing

A syringe-fed toolhead follows the edge of a metal housing held in a fixture. The source video is identified in the GX library as an antenna-component silicone dispensing process.

What the footage shows

Metal housing in a dedicated fixture
Syringe-fed dispensing head
Toolpath along the housing edge

For your application: Confirm the material grade, bead geometry, surface preparation and cure method using the actual part.

GX process footage

02 / Automatic screwdriving

Fastening PCB assemblies in a multi-part fixture

A screwdriving head works over small PCB assemblies located in an orange production fixture, with a screw presentation unit alongside the work area.

What the footage shows

Multiple assemblies positioned in one fixture
Automatic screw presentation
Driver alignment at the fastening point

For your application: Confirm screw size, torque target, fixture design and required cycle time before specifying a machine.

GX process footage

03 / Robotic soldering

Soldering contacts on compact PCB modules

A soldering tip and feed wire approach small PCB contacts held in a row fixture. The footage shows the tool working at repeated component positions.

What the footage shows

Small PCB modules in a repeatable fixture
Soldering tip and wire feed
Tool contact at board terminals

For your application: Confirm joint geometry, solder alloy, heat profile and acceptance criteria with sample boards.